Removal of window tinting may be a complicated and messy process if one does not identify the best and easiest way to go about it. Although there are different procedures to go about it, the process can be summarized in three easy steps. These include gathering materials, removal of tint and cleaning of the windows after the process. The materials required in the removal of tint from the window usually differ and depend on the procedure that is looking to use to remove the tint. If one opts to steam the tint off, the list of materials could be rather short. This is because one is required to purchase a clothing steamer the number will depend on the amount of space from which the tint is removed.
Other tools or materials involved will include a long extension cord, a number of rags, a cup or bottle full of water and Windex. If one is looking to use razor blades one may need a number of other items apart from Windex which is also required. Ammonia that is not diluted, tarp, fine steel wool, paper towels and a garbage bag are also needed. However, one will need to carry this out on a sunny day. To use the soak and scrape approach one needs a razor blade, some water and glass cleaner and paper towels. The soak and scrape method is the easiest as it can be completed in a number of easy steps though it could take more time as compared to other methods. Once the materials are ready, one needs to cut a small part with razor blade to create a tab from where they can be able to pull.
The tint is then peeled off and the adhesive is sprayed using water. It is then scraped off using the razor blade and the window is eventually cleaned to finish the process. Since the razor can become blunt, one may have to use several before the process is over. The steaming approach is also pretty simple as one begins by steaming a section of the tint. The steamers should be held at least five centimeters way from the tint. This is enough for one to pick the tint yet far enough to help avoid injury from the steam. One is expected to peel while they steam. Even then the peeling should be done slowly repeatedly so as to have both layers come off intact hence avoid complicating the process. After this is done, any remaining tint or glue could be wiped off using a towel. If the glue is too hard it could be steamed and then removed.
This should be done over the whole area after which the surface should be cleaned thoroughly. In the Ammonia and sun method, one usually begins by spraying a section of the tint using ammonia. This is consequently covered by a garbage bag preferably plastic. The tarp is used to cover and thus protect the other parts around the area from Ammonia.
Enjoy your car and find the best deal on the insurance coverage you need. Visit us for money-saving tips, free auto insurance comparisons and affordable insurance advice at Auto Insurance Rates Direct.
Article Source: http://EzineArticles.com/?expert=Levi_Quinn
No comments:
Post a Comment